Kinman K9 Goodbye-Soldering Harness Gen-2 - For Stratocaster

Kinman K9 Goodbye-Soldering Harness Gen-2 - For Stratocaster

A$225.00

Kinman K9 Harness to suit Stratocaster Sets.

9+ sounds for Stratocaster* (3 single coil pickups or non-splitting humbuckers in HSS/HSH configuration)

Accepts non-Kinman pickups also.

Includes:

  • OAK Grigsby lever switch (USA)

  • Switchcraft Jack socket (USA)

  • High quality easy turning pots with accurate value specially made for Kinman (3/8" bushing)

  • Knobs & Switch tip includedThe volume pot has the famous Kinman treble bypass filter so you won't lose highs when you turn the volume down.  A unique additional feature is the internal slide switch where you can select either of 2 tone caps, the Kinman High Definition Tone cap, or a regular tone cap if you want normal extreme treble cut.  Another unique feature is the mini slide switch that changes the volume pot from 250k to 500k -OR- a separate ability to set the volume pot value to either 250k or 500k for any or all pickups.  This allows you to use Humbuckers, P-90's, Kinman Big-Nine-O or other types of pickups that sound best with a 500k volume pot in combination with pickups that sound best with a 250k volume pot. .... -or- perhaps you just want to hear what your Strat pickups sound like with a 500k volume pot.

The pots and K9 control are user replaceable without soldering (in the rare event one needs to be replaced). The K9 harness provides all 5 normal Strat sounds plus 4 highly usable new dimension sounds. The 6th, 7th and 8th sounds are variations of the distinctive Knopfler-esque quack sound while the 9th sound is in Gibson P-90 territory and provides boost in output for natural crunch sounds. These are selected with the lower Push/Push pot. Popping the knob out with the pickup selector switch in position 2 re-connects the Bridge & Middle from parallel into series*, for boost in output and instant humbucker/P-90ish crunch: and also *that* plus the neck pickup in parallel for fat hollow Knopfler-esque sounds.

NOTE-1: available for Right and Left hand

NOTE-2: suitable for both pickguard mounting and & rear rout control cavities such as offered by Warmoth.

Quantity:
Add To Cart